Round duct and teets

S-Flange, Premium-Flange with BUTYL-sealant

Galvanized CORNER 20, 30 & 40 & Swah corners

Weather louvre (self-assembly kit) 40 mm

Strut / channel section

Mounting Flange

Damper quadrant / manual adjuster

Flexible duct connector, gasket tape

Connecting and mounting material

Access door / access panel & access panel for spiral tubes

Flexible aluminum hoses

Slide mount, · suitable for flange systems Premium, P, S & L

Multi-Blade Damper

Copper pipes

Art. Nr. Type Name Parameters Packaging Description
800 100 001 Copper pipe DUAL LINE 1/4-1/2 x0,8mm length 25m
length 50m		 insulated copper pipe
800 100 002 Copper pipe DUAL LINE 1/4-3/8 x0,8mm length 25m
length 50m		 insulated copper pipe
802 100 007 Copper pipe SOLO LINE 1/4 (6,35)
x0,8mm		 length 25m
length 50m		 insulated copper pipe
800 100 003 Copper pipe SOLO LINE 3/8 (9,52)
x0,8mm		 length 25m
length 50m		 insulated copper pipe
800 100 004 Copper pipe SOLO LINE 1/2 (12,70)
x0,8mm		 length 25m
length 50m		 insulated copper pipe
800 100 005 Copper pipe SOLO LINE 5/8 (15,88)
x1,0mm		 length 25m
length 50m		 insulated copper pipe
801 100 006 Copper pipe SOLO LINE 3/4 (19,05)
x1,0mm		 length 25m
length 50m		 insulated copper pipe

Round duct and teets

Round circle

We sell various diameters of spiro tubes and fittings according to the drawing documentation.

Air conditioning profiles

The air duct profiles are delivered in several systems KF, S, Plus, PREMIUM the profiles 20 and 30 EVENTUEL 40 are stored in lengths of 5 m and volumes of 500 m.

JD 20 – galvanized sheet 0,60 mm thick

Art. Nr. Type
301 010 500 galvanized sheet

JD 30 – galvanized sheet 0,70 mm thick

Art. Nr. Type
301 020 500 galvanized sheet

Galvanized Corner 20,30&40 & SWAH CORNERS

JD 20/3

Art. Nr. Material PU
302 010 019 galvanized steel 500 pcs
302 010 341 stainless steel 100 pcs
302 010 070 aluminium 100 pcs

JD 20/3L

Art. Nr. Material PU
302 220 016 galvanized steel 500 pcs
302 220 040 stainless steel 100 pcs

JD 30/4

Art. Nr. Material PU
302 070 020 galvanized steel 250 pcs
302 550 015 stainless steel 50 pcs
302 050 070 aluminium 50 pcs

Galvanized Corner 20SH

Corner for air-conditioning profiles of type 20 SWAH

Art.Nr. Material  PU
400 100 020 galvanized 300 pcs

Galvanized Corner 20LSH long

Corner for air-conditioning profiles of type 20 SWAH

Art. Nr. Material PU
400 100 021 galvanized 300 pcs

Galvanized Corner 30SH

Corner for air-conditioning profiles of type 30 SWAH

Art. Nr. Material PU
400 100 030 galvanized 300 pcs

Weather louvre (self-assembly kit) 40 mm

Profile of the lamella, stored in 5m lengths. Volumes of 250, 500, 1000m:

Art. Nr. Material
304 030 010 galvanized sheet
304 030 040 stainless steel
304 030 070 aluminum

Frame profile, stored in 5m lengths, bundles of 100m:

With moldings for fastening the lamella profile with self-tapping screws or with our metal aperture.

Art. Nr. Material
304 040 010 galvanized
304 040 040 stainless steel
304 040 070 aluminium

Corner piece for weather louvre (40 mm)

PU packing 250 pcs.

Art. Nr. Material
304 050 010 galvanized
304 050 040 stainless steel
304 050 070 aluminium

Lamella holder (40 mm)

Art. Nr. Description Material Length
304 040 020 Lamella holder (40 mm) galvanized 2.500 mm

Wire grating

Art. Nr. Description Material Dimensions Width Rolls
304 100 010 Wire grating 12,7 Galvanized 12,7 x 12,7 x 1,05 mm 1.020 mm 25 m
304 110 010 Wire grating 16 Galvanized 16 x 16 x 1,20 mm 1.020 mm 25 m
304 120 010 Wire grating 19 Galvanized 19 x 19 x 1,45 mm 1.010 mm 25 m

Strut / channel section

Mounting profile galvanized steel

It is used in air-conditioning for the fitting of air ducts, heating, gas, water, and the like. They are fastened, for example, by threaded teeth which are fastened to the wall by means of the nozzles. Our company has a maximum of 6 meters of mounting rail.

Art. Nr. Type Length
305 020 010 HT 20×30/ thickness 1,75mm standard 5-6m
305 050 010 HT 30×30/ thickness 1,75mm standard 5-6m
305 080 010 HT 45×30/ thickness 1,75mm standard 5-6m

Wall Mount

Wall bracketIt is a fastener that is designed to mount the mounting rail horizontally using a bolt and nut bolt.This feature greatly extends the versatility of the mounting rails. Taking into account the requirements of pipelines which are conducted at different heights and in different routes. Because of this, a wall mount is very advantageous.

Compatible with all types of mounting profiles HT20, HT30, HT45 supplied by us.

Art. Nr. Material thickness
405 080 010 3mm

Insulation rubber for struts/channel sections

It serves to suppress or reduce the recesses and shocks that result, for example, from the operation of an air-handling unit engine or other device. It also protects against damage to the surface or air duct itself. It is versatile for all types of mounting rails. The dampening rubber slides onto the mounting rail. It has a very simple installation.

Art. Nr.
305 110 000

Protective Cap for struts/channel sections

It is designed to terminate the opening at the end of the mounting rail. It is made of plastic and is required for the protection of fitters or people in general against injuries because the edges on the mounting rails are very sharp and there is a risk of injury. Blanks are packed in 100 pieces.

Stoppers are for dimensions:

Art. Nr. Type
305 210 000 T 20, 20mmx30mm
305 220 000 T 30, 30mmx30mm
305 230 000 T 45, 45mmx30mm

Mounting flange – galvanized

The flanges are used to connect the circulating air duct or connect other circular components. (dampers, extensions, flaps, etc.). we supply galvanized steel, copper, antikor /V2A/.

Art. Nr. Diameter
500 100 080 80
500 100 100 100
500 100 110 110
500 100 125 125
500 100 140 140
500 100 150 150
500 100 160 160
500 100 180 180
500 100 200 200
500 100 225 225
500 100 250 250
500 100 280 280
500 100 315 315
500 100 355 355
500 100 400 400

Damper quadrant/manual adjuster

The klaps are designed to close or regulate the flow of air in a circular or square pipe.

Klap 1

Handle lever, threaded bolt, wing nut, spring bolt. For air ducts up to a diameter of 200 mm.

Art. Nr.
307 010 010

Klap 2

12 mm axes, turning lever, one round and square bolt plate, tensioning bolt and sealing. For air ducts up to a diameter of 650 mm.

Art. Nr.
307 020 010

Klap 3

12 mm axes, turning lever, one round and square bolt plate, tensioning bolt and sealing. For air ducts up to a diameter of 850 mm.

Art. Nr.
307 020 010

Klap 4

Handle lever, bolt, spring bolt. For air ducts up to a diameter of 250 mm.

Art. Nr.
307 040 010

Klap 5

Handle lever, bolt, spring bolt. For air ducts up to a diameter of 500 mm and 250 mm.

Art. Nr.
307 050 010

Klap 6

Airtight original damper quadrant · Suitable for round and rectangular ducts, For air ducts up to a diameter of 650 mm.

Art. Nr.
307 060 010

Control of throttle and throttle valves for circular piping

The plastic control does not corrode and allows simple assembly by riveting or screwing directly onto the flap shell. The shaft is stored freely and is firmly connected to the control lever. Material nylon.

Art. Nr.
400 150 100

DURO DYNE SRST1  Original Canada

Metal original high-quality DURO DYNE MADE IN CANADA driver with square on the control arm TYPE SRST1.

Art. Nr.
400 150 101

Flexible duct connector, gasket tape

Gasket tape

It can be used, for example, for insulating holes or for joining the air duct (seals) as a seal. The sealing tape (vitolen) is glued over the entire surface of the flange and then the individual components of the air-conditioning piping are joined together. This seals the connection point between the pipe parts. The tape is packed after20 meters on one roll.

Art. Nr. Type
405 100 000 9 x 4mm
405 100 001 9 x 6mm

Aluminum tape. self-adhesive ALU TAPE

Aluminum tape. self-adhesive ALU TAPEIt is used when installing air ducts as a repair tape or as a connecting tape. Prevents moisture from penetrating. The aluminum tape is sold in three different sizes (widths), 50mm, 75mm, 100mm. They all have the same length of 50m.

Features:

  • Total thickness: 0.075 mm
  • Glue: Acrylic
  • Temperature range: -30 °C +120 °C
  • Glue Strength: 20 N / 25mm
  • Tensile strength: 37.5 N / 25mm
Art. Nr. Type
400 200 100 50 / 50, 30 mikron (aluminum layer)
400 200 101 75/50, 30 mikron
400 200 102 100/50, 30 mikron

Flexible duct connector

They are used to connect air ducts.

Art. Nr. Description Width of the extension Design PU Quantity of pallet
309 022 010 EV 35/40/35 110 mm galvanized 25 m 1.400 m
309 023 010 EV 35/60/35 130 mm galvanized 25 m 1.400 m
309 024 010 EV 35/110/35 180 mm galvanized 25 m 1.000 m
309 010 010 EV 45/60/45* 150 mm galvanized 25 m 1.400 m
309 100 010 EV 45/100/45 190 mm galvanized 25 m 1.200 m
309 110 010 EV 45/120/45 210 mm galvanized 25 m 800 m
309 020 010 EV 65/95/65* 225 mm galvanized 25 m 700 m
309 010 040 EV 45/60/45 – V2A* 150 mm Stainlles steel 25 m 1.400 m
309 100 040 EV 45/100/45 – V2A 190 mm Stainlles steel 25 m 1.200 m

Akryl

One-component sealant based on acrylic dispersion and can be overlaid with paint. Acrylic is an easy-to-use high quality elastic-plastic sealant with a very good adhesion for internal use.

Art. Nr. Type
411 030 000 grey color 315 ml.

Gebhardt-PLAST

One-component sealant, easy-to-use high quality elastic-plastic sealant with very good adhesion for internal use.

  • Base material: polyacrylic dispersion
  • Color grey
  • Without solvents and without silicone
  • No surface of the impurities
  • Almost odorless
  • Resistance to aging and weather
  • Good adhesion properties
  • Temperature resistance from -20 °C to + 80 °C
  • Classified as very well disinfected
  • Suitable according to VDI 6022
Art. Nr. Type
on request clear color
311 030 010 grey color

Repair spray

For surface repair of zinc layers after drilling, cutting, welding, grinding, bending. Can be used on any type of steel substrate. Protects against corrosion. Creates a smooth, pore-free film that resists temperatures up to + 300 ° C.  Paintable.

Art. Nr. Type
409 420 000 the proportion of zinc 99% glazy
409 420 001 the proportion of zinc 99% mat
309 420 010 Universal

Fastening and montage material

Polyethylene foil is specially designed for sealing air ducts, allows storing and transporting of individual components clean and without impurities. The product is confirmed, and certified in compliance with the Certified hygiene according to VDI 6022.

This UV Foil is suitable for sealing air ducts, pressed parts, other pipe components, has good adhesion properties to galvanized sheet metal and stainless steel. Foils good resistance to weathering and UV radiation helps with its easy and residue-free removal.

Art. Nr. Category Name Thickness Length Width Description
313 600 000 Assembly material SEALING HVAC FOIL TAPE 50 microns 100m width 1m self-adhesive UV film
313 600 001 Assembly material SEALING HVAC FOIL TAPE 50 microns 100m width 0,5m self-adhesive UV film

Distanc extension nut

It is used to connect the threaded rods that the air duct plugs in different rooms. They are especially necessary when extending threaded rods when more space is required over the air-conditioning piping.

  • package 100pcs
  • material: galvanized steel
  • thread diameter: M6, M8, M10, M12
Art. Nr. Thread
400 250 100 M6
400 250 101 M8
400 250 102 M10
400 250 103 M12

Threaded rods galvanized with metric thread M6,M8,M10, DIN975

The threaded rod is used to hold air ducts in different areas.

Material: galvanized steel minimum strength. 4.8

Art. Nr. Thread D(mm) Length (mm)
414 110 010 M6 1000
414 120 010 M6 2000
314 130 010 M8 1000
314 140 010 M8 2000
414 140 011 M8 3000
314 150 010 M10 1000
314 160 010 M10 2000
414 170 010 M12 1000
414 180 010 M12 2000

Flat washer zinc plated

Made of galvanized steel. The sales package contains 100 pieces of flat washers. It is used to secure bolts and nuts against screw connection when vibrations are possible.

Variants we offer for sale.:

Art. Nr. Type
404 010 011 M8
404 110 011 M10

Washers made to DIN 6975

They are used as active locking elements which, when tightening screws or nuts with their sharp edges, are “heated” to the surface of the bonded materials.

Art. Nr. Type
404 010 111 M8
404 110 111 M10

Spring washer DIN 127

Art. Nr. Type
404 010 101 A 8.4
404 110 101 A 10.5

DIN 9021 large-area washer

Invisible bodywork M8 and M10

Art. Nr. Type
404 111 101 M8
404 112 101 M10

Zinc plated nuts DIN 934

Zinc nuts are used to attach the hinge to the threaded rod and to install the pipe into the space. They are also used to connect individual parts of the air-conditioning piping between them.

Art. Nr. Type d(mm) m(mm) s(mm)
404 020 000 M8 8 5 13
404 120 000 M10 10 5 17

Zinc coated screws DIN 933

They are used when installing air ducts. For connecting individual parts of the air-conditioning piping between them. It is also used when installing reinforcements in large air handling units.

Metric thread is the most widespread type of threading for connecting screw connections in the world. Metric thread standard was one of the first international standards adopted by ISO. The metric thread can be: Used in screws M8, M10, M6.

Art. Nr. Type L(mm) k(mm) s(mm)
404 010 000 M8 20 5 13
404 010 001 M8 25 5 13
404 110 000 M10 25 5 17

Drill screw with hex drive DIN 7504K

Secure fit and tight hold due to toothed underside. Zn TEXX, made of galvanized steel. The tection screw has a thickness of 4.2 mm and 4.8 mm. It is packed in 1000 pieces in one package. It is used, for example, for joining spiro tubes with clutches to hold them firmly and not releasing.

  • material: galvanized steel
  • TEXX screw: M 4,2 a M 4,8
  • package: 1000 pcs
Art. Nr. d(mm) L(mm)
317 010 010 4,2 13
317 020 010 4,2 16
317 030 010 4,2 19
417 040 010 4,8 13
417 050 010 4,8 16
417 060 010 4,8 19

Drill screw with inner square drive DIN 7504V

Zn TEXX.

  • material: galvanized steel or stainles steel
  • screw: M4,2 a M4,8
  • package: 1000 pcs
  • inclusive adapter for 1000 pcs inside
Art. Nr. d(mm) L(mm)
317 010 020 4,2 13
317 020 020 4,2 16
317 030 020 4,2 19
417 140 010 4,8 13
417 150 010 4,8 16
417 160 010 4,8 19

Self-adhesive spikes

They are used to hold the insulating material on the surface of the air duct. It is recommended to use 10-12 self-adhesive handles per square meter.

Art. Nr. Type length(mm) d(mm) A(mm)
400 300 100 25 25 2,7 50
400 300 101 33 33 2,7 50
400 300 102 43 43 2,7 50
400 300 103 53 53 2,7 50
400 300 104 63 63 2,7 50
400 300 105 76 76 2,7 50
400 300 106 115 115 2,7 50

Plate for air duct stiffening

Used to fasten reinforcement to air ducts. The plate is installed on the outside of a circular or circular air duct, especially in large (dimensional) shapes, into which a bolt is inserted through the opening, which is then clamped into the reinforcement.

Art. Nr. Description Material
313 070 030 6,5 mm Glavanized steel
313 070 010 8,5 mm Glavanized steel
313 070 020 10,5 mm Glavanized steel
313 070 040 6,5 mm – V2A Stainles steel V2A

Conduit/Reinforcing rod

Steel, galvanized, in 6m lengths.

Art. Nr. Description Dimensions
313 200 016 15 x 1,5 15 x 1,5 mm
313 200 012 16 x 2,0 16 x 2,0 mm
313 200 014 16 x 1,0 16 x 1,0 mm
313 200 010 3/8″ 17,2 x 2,35 mm
313 200 040 14 x 2,0 – V2A 14 x 2,0 mm
313 200 140 15 x 1,5 – V2A 15 x 1,5 mm

Turning vane fastener

To fasten plates in air ducts. Simple and fast fix by hammer strike. No welding, riveting or bending of sheets. Enhanced lateral strength thanks to a parallel S-sheet metal drawerWith a removable flexible sealing disc. Resistant to corrosion due to galvanic zinc coating. Suitable for different sheet thicknesses and materials. Also for fastening lamella profiles in protective lattices against weathering effects.

Art. Nr. Type  For sheet metal thickness
306 035 010 Galvanized – small 0,75 mm-0,90 mm
306 050 010 Galvanized – big 0,75 mm-1,20 mm
306 010 013 Stainless 0,75 mm-1,20 mm

Clamp for spiral tubes

Ideal product for very strong, reliable mounting of circular manifolds to structures. The sleeve is two-piece, double-screw, galvanized to hold the circular air duct up to the height. Circumferential rubber serves to reduce the vibration of the circular pipe. On one side is the M8 thread nut. The sleeves are supplied without threaded rods. Not only for steel piping.

Attachment nut M8-M10.

Features:

  • Galvanized steel with insulation rubber
  • Welded on combination nut M8/M10
  • Quick and convenient installation as a result of wide opening angles
  • Click-in lock (up to 400 mm)
Art. Nr. Dimension
315 410 010 80 mm
315 430 010 100 mm
315 450 010 125 mm
315 460 010 140 mm
315 470 010 150 mm
315 480 010 160 mm
315 490 010 180 mm
315 500 010 200 mm
315 510 010 224 mm
315 520 010 250 mm
315 530 010 280 mm
315 540 010 300 mm
315 550 010 315 mm
315 570 010 355 mm
315 580 010 400 mm
315 590 010 450 mm
315 600 010 500 mm
315 610 010 560 mm
315 620 010 630 mm
315 630 010 710 mm
315 640 010 800 mm
315 650 010 900 mm
315 660 010 1000 mm

G-Clamp/Bolt-on cleat “standard”

It serves for simple and quick connection of the pipe with C clamps, which are installed on the flanges and thus connect the individual parts of the square air duct. After clamping the clamps, the individual parts fit together. The thickness is 2.5mm.

  • Suitable for flange systems “Premium”, “P”, “S” & “L”
  • Suitable for flange 20, 30 & 40
  • Screw included

Dimensions:

  • A: 32mm
  • B: 19 mm
  • C: 13 mm
  • Screw M8 x 25mm
Art. Nr. Type Material
303 021 013 M8 x 25mm Galvanized steel

Beam clamp

They are used to fix the air-conditioning pipes in different areas. The clamps are fastened to the beam and threaded rods of various sizes M6, M8, M10 can be screwed into them to which individual components can be fastened.

Art. Nr. Type B [mm] C [mm] D [mm] M [mm] Max. Load[kg]
313 140 008 M8 38 35 M8 10 112
313 140 010 M10 45 42 M12 10 245

Steel anchor

Suitable for easy installation in concrete and easy assembly and dismantling. Ceiling and wall installation. The threaded rod or screw is dismantled without any more force. Packaging 100pcs.

Art. Nr. Thread Anchor length Thread length Diameter of opening Depth of hole Tightening torque
400 350 100 M6 25 11 8 27 4,5
400 350 101 M8 30 13 10 32 11
400 350 102 M10 40 15 12 42 22

Brass drop in Anchor

Suitable for easy installation in concrete and easy assembly and dismantling. Ceiling and wall installation. The threaded rod or screw is dismantled without any more force. Thread M8.

Art. Nr. Type
400 400 100 M8

Z-Holder

The holders are used for the installation of the rectangular ductwork. Hinges are provided with individual parts of the square pipe. The threaded rods are threaded on the individual hinges, and they are fastened to the wall using the anchor bolts.For fitting a rigid pipe with a bottom mounting. Load capacity up to 50kg.

Art. Nr. Material
313 120 010 Galvanized steel

R-Holder

For installation of Round piping. Load capacity up to 50kg, holders are packed in 100 pieces.

Art. Nr. Material
313 130 010 Galvanized steel

Trapeze hanger for spiral tubes

For installation of round piping. Load capacity up to 50kg, holders are packed in 100 pieces.

Art. Nr. Material
313 130 020 Galvanized steel

L-Holder

For the installation of a rectangular ductwork with a side fastening. Load capacity up to 50kg.

Art. Nr. Material
313 110 010 Galvanized steel

Combi screw for fixing wall brackets

Art. Nr. Type
413 010 011 M8 x 100
413 020 011 M10 x 100

Clamp Band

Galvanized version in a drum 30m.

Art. Nr.
413 030 011

Multi Clamp Band lock

Art. Nr.
413 040 011

Air Valves

Wide Range – Quotation on Demand!

Access door/access panel

They have a rubber seal around the circumference, which prevents the air from escaping from the pipe. Revision doors are used in air conditioning for the technical inspection of the air-conditioning piping. Material and features: zinc steel, rubber seal, simple installation, easy access to pipe cleaning.

Access door for rectangular ductwork

Door dimensions:

Art. Nr. Description Dimension
308 100 010 ID 18 180 x 80 mm
308 100 020 ID 21 200 x 100 mm
308 110 010 ID 315 300 x 150 mm
308 110 020 ID 32 300 x 200 mm
308 120 010 ID 42 400 x 200 mm
308 120 020 ID 43 400 x 300 mm
308 130 010 ID 53 500 x 300 mm
308 130 020 ID 54 500 x 400 mm
308 140 010 ID 64 600 x 400 mm
308 140 020 ID 65 600 x 500 mm
308 150 010 ID 75 700 x 500 mm

Access door/access panel for spiral tubes

Door dimensions:

Art. Nr. Dimension For ø min-stand.-max
308 180 010 180 x 80 mm 76 – 80 – 92
308 200 010 180 x 80 mm 93 – 100 – 114
308 210 010 180 x 80 mm 115 – 125 – 130
308 210 011 180 x 80 mm 131 – 140 – 150
308 210 015 180 x 80 mm 151 – 160 – 170
308 220 010 200 x 100 mm 130 – 140/150 – 155
308 230 010 200 x 100 mm 156 – 160/180 – 190
308 240 010 200 x 100 mm 191 – 200/224 – 240
308 250 010 200 x 100 mm 241 – 250/280 – 300
308 260 010 200 x 100 mm 301 – 315/355 – 360
308 260 020 300 x 200 mm 260 – 280 – 300
308 270 010 300 x 200 mm 301 – 315 – 340
308 280 010 300 x 200 mm 341 – 355 – 380
308 280 110 300 x 200 mm 381 – 400 – 420
308 280 120 300 x 200 mm 421 – 450 – 470
308 280 130 300 x 200 mm 471 – 500 – 530
308 290 010 400 x 300 mm 370 – 400 – 420
308 300 010 400 x 300 mm 421 – 450 – 470
308 310 010 400 x 300 mm 471 – 500 – 530
308 320 010 400 x 300 mm 531 – 560 – 600
308 330 010 400 x 300 mm 601 – 630 – 670
308 340 010 400 x 300 mm 671 – 710 – 750
308 350 010 400 x 300 mm 751 – 800 – 850
308 360 010 400 x 300 mm 851 – 900 – 950
308 370 010 500 x 400 mm 520 – 560 – 600
308 380 010 500 x 400 mm 601 – 630 – 670
308 390 010 500 x 400 mm 671 – 710 – 750
308 400 010 500 x 400 mm 751 – 800 – 850
308 410 010 500 x 400 mm 851 – 900 – 950
308 420 010 500 x 400 mm 951 – 1000 – 1060
308 430 010 500 x 400 mm 1061 – 1120 – 1180
308 440 010 500 x 400 mm 1181 – 1250 – 1320
308 450 010 500 x 400 mm 1321 – 1400 – 1500
308 460 010 500 x 400 mm 1501 – 1600 – 1800

Flexible Ducts

ALUVAC

Very rigid flexible ducts. Its sheath is made of aluminum laminate and reinforced with steel wire spiral. Ideal use for ventilation ducts in any object. The design of the hose provides almost unlimited flexibility.

Art. Nr. Dimension
600 100 102 102mm x 10m
600 100 127 127mm x 10m
600 100 152 152mm x 10m
600 100 160 160mm x 10m
600 100 203 203mm x 10m
600 100 254 254mm x 10m
600 100 315 315mm x 10m
600 100 356 356mm x 10m
600 100 406 406mm x 10m

ISOVAC

The thermally insulated flexible ducts ISOVAC 25 completely replaces the classically insulated pipe, significantly shortens assembly time and allows air ducts to be run even in very difficult areas. The thermal insulation is made of mineral wool, the outer layer is made of aluminum laminate film, which also serves as an effective protection against damage to the ducts.

Art. Nr. Dimension
600 200 102 102mm x 10m
600 200 127 127mm x 10m
600 200 152 152mm x 10m
600 200 160 160mm x 10m
600 200 203 203mm x 10m
600 200 254 254mm x 10m
600 200 315 315mm x 10m
600 200 356 356mm x 10m
600 200 406 406mm x 10m

SONOVAC

The thermally and noise-insulated flexible aluminum ducts with micro perforation SONOVAC 25 completely replaces the classically insulated piping, significantly shortens the assembly time and allows the air ducts to be run even in very difficult areas. The thermal insulation is a mineral wool that is protected by a polyester sleeve that prevents insulating fibers from entering the pipe. The outer layer is made of aluminum laminate foil, which also serves as an effective protection against ducts damage.

Art. Nr. Dimension
600 300 102 102mm x 10m
600 300 127 127mm x 10m
600 300 152 152mm x 10m
600 300 160 160mm x 10m
600 300 203 203mm x 10m
600 300 254 254mm x 10m
600 300 315 315mm x 10m
600 300 356 356mm x 10m
600 300 406 406mm x 10m

SEMIVAC

Semivac is a flexible aluminum ducts of circular cross-section, called goose neck. It is designed for air distribution in buildings. Ideal for household hoods. Supplied in compressed state, we reach the required length after a quick pull. Not suitable for chimney lining.Package contents: The ducts is pressed in the carton.

Art. Nr. Dimension
600 400 100 102mm x 10m
600 400 125 127mm x 10m
600 400 150 152mm x 10m
600 400 160 160mm x 10m
600 400 200 203mm x 10m
600 400 250 254mm x 10m
600 400 315 315mm x 10m

Mounting material

Slide Mount

  • Suitable for flange systems “Premium”, “P”, “S” & “L”
  • Suitable for flange 20, 30 & 40
  • Screwless assembly
  • Two functions: cleat and hanger in one
  • With mounted insulation element
  • For threaded rods 8-10 mm
  • Max capacity: 785 N per attachment
Art. Nr.
313 500 010

Grip for reinforcing rod

  • For cross-connections of reinforcing rods in ductwork with large cross-section
  • Suitable for Gebhardt-Tubes 16 x 2, 16 x 1 & 3/8″
Art. Nr. Material
313 200 000 polyetylen

Fischer-dowel Metric thread M6

Nylon dowel with metric thread M6 The dowel has a high unbundling due to its large internal diameter. Easy and safe assembly. Due to the high degree of dilation, the anchor is not sensitive to irregularities in the substrate. Versatile – possibility to use standard threaded rods or screwdrivers.

Art. Nr.
413 210 000

Perforated tape

Art. Nr. Description Material Screw hole Rolls PU
315 010 010 Perforated tape 17 x 0,6 mm Galvanized 8,5 mm 25 m 125 m
415 010 010 Perforated tape 20 x 0,6 mm Galvanized 8,5 mm 25 m 125 m
315 020 010 Perforated tape 25 x 0,75 mm Galvanized 8,5 mm 25 m 125 m

Multi-Blade Damper

click on the image to enlarge

Multi-Blade DamperJK-A-02

Name Art. Nr.
Blade, aluminium, 100 mm x 5 m 700 010 000
Blade, galvanised steel, 100 mm x 5 m 700 010 070
Gear, external mounting, plastic, 100 mm for steel or aluminium blades 700 210 070
Standard bearing, plastic 700 020 000
Spindle, short, plastic 700 23 0000
Spindle, long, plastic 700 25 0010
Drive arm, galvanised steel, 10 x 10 x 150 mm 700 270 010
Jointing 700 370 010
Corner 30 mm galvanised for C-flange 700 190 000
Corner 20 mm galvanised for C-flange 700 310 010
Side section, 1.25 mm profiled galvanised steel plate with hexagonal holes, hole spacing = 100 mm C-flange 30 mm, depth 120 mm, 2.5 m long 700 300 010
Safety (tightening) bolt, 10 x 10 x 50 mm, plastic (only necessary for spindle short) 700 260 010
Gasket of the slip ring 700 280 010

click on the image to enlarge

Multi-Blade DamperJK-I-02

Name Art. Nr.
Blade, aluminium, 100 mm x 5 m
Blade, galvanised steel, 100 mm x 5 m 700 010 070
Universal gear, internal mounting, plastic, 100 mm for steel or aluminium blades 700 210 070
Standard bearing, plastic 700 080 000
Spindle, short, plastic 700 230 000
Spindle, long, plastic 700 250 010
Drive arm, galvanised steel, 10 x 10 x 150 mm 700 270 010
Jointing 700 370 010
Corner 30 mm galvanised for C-flange 700 190 000
Corner 20 mm galvanised for C-flange 700 310 010
Side section, 1.25 mm profiled galvanised steel plate with hexagonal holes, hole spacing = 100 mm C-flange 30 mm, depth 120 mm, 2.5 m long 700 300 010
Safety (tightening) bolt, 10 x 10 x 50 mm, plastic (only necessary for spindle short) 700 260 010
Gasket of the slip ring 700 280 010

click on the image to enlarge

Multi-Blade DamperJK-I-04G

Name Art. Nr.
Blade, aluminium, 100 mm x 5 m, with slot for insertion of rubber edge seal
Rubber edge seal 700 010 070
Gear, internal mounting, plastic, 100 mm 700 090 000
Standard bearing, plastic 700 080 000
Spindle, long, plastic 700 230 000
Drive arm, galvanised steel, 10 x 10 x 150 mm 700 270 010
Jointing 700 370 010
Corner 30 mm galvanised for C-flange 700 190 000
Corner 20 mm galvanised for C-flange 700 310 010
Side section, 1.25 mm profiled galvanised steel plate with hexagonal holes, hole spacing = 100 mm C-flange 30 mm, depth 120 mm, 2.5 m long 700 300 010